Histological and morphometrical evaluation of the urethral wall after bioresorbable stent implantation in male New Zealand White Rabbits: A preliminary study.

The aim of the study was the histological and morphometrical evaluation of the urethral wall at three time points after bioresorbable stent implantation in male New Zealand White Rabbits. The research was performed on 26 male New Zealand White rabbits aged 3-4 months and weighing 2.1-3.0 kg. Two models of bioresorbable sodium alginate-based stents were developed and implanted into the urethral lumen for one (T1), three (T3), and six weeks (T6). Sections of 5 µm thickness were cut from the urethra at intervals of 2 mm. The sliced sections were stained with hematoxylin-eosin (H&E), Van Gieson's (VG), Von Kossa, and Movat-Russell modified pentachrome (MOVAT) staining methods. The study provided valuable information for future models of urethral stents. The first model of the stent failed to fit the requirements due to inadequate mechanical properties. It curled up on itself losing the ability to adhere to the animals' urethra and was bioresorbed three weeks after implantation. The more rigid no. 2 stent was effective in widening the urethral lumen but did not biodegrade during the experiment. A comprehensive assessment of the second model's properties of biosorption and biointegration requires an extended observation of at least 12 months for an in depth morphological analysis. Stent migration is not likely to be caused solely by the mechanical properties of the urethra or urinary flow but mainly by muscle contraction of the organ wall.

Occurrence and molecular characterization of Escherichia coli strains isolated from black grouse (Lyrurus tetrix) from the Karkonosze National Park in Poland.

The purpose of this study was to characterize Escherichia coli (E. coli) strains isolated from wild black grouse (Lyrurus tetrix), carried out due to the crossing of hiking trails with wild bird habitats from the Karkonosze National Park. Twenty-seven E. coli isolates were obtained from fecal samples collected during the winter months of 2017 and 2018. The strains were assigned to their relevant phylo-groups and the prevalence of virulence genes characteristic of APEC strains (irp2, astA, iss, iucD, papC, tsh, vat, cva/cvi, stx2f) was checked using PCR analysis. In addition, the phenotypic and genotypic resistance to antibiotics was determined. The entire study provided a better understanding of the potential bacteriological threat to wild birds of the Karkonosze National Park. The results showed that 55.6% of the strains belonged to phylo-group B1 (15/27), 33.3% to group B2 (9/27) and 11.1% to group D (3/27). Among the virulence genes tested, irp2 was detected in 25.9% of isolates (7/27), vat in 22.2% (6/27) and iucD in 3.7% (1/27). The tested E. coli strains showed susceptibility to most antimicrobials, only 14 (51.9%) of them were intermediate resistant or resistant to sulfamethoxazole. The presence of none of the tested genes responsible for resistance to selected antibiotics was identified. Our research indicates a low level of transfer of antimicrobial substances to the natural environment and confirms the effectiveness of the Karkonosze National Park's activities to protect and restore black grouse habitats.

Electrical, thermal and noise properties of platinum-carbon free-standing nanowires designed as nanoscale resistive thermal devices.

Platinum-carbon (PtC) composite nanowires were fabricated using focused electron beam induced deposition and postprocessed, and their performance as a nanoscale resistive thermal device (RTD) was evaluated. Nanowires were free-standing and deposited on a dedicated substrate to eliminate the influence of the substrate itself and of the halo effect on the results. The PtC free-standing nanowires were postprocessed to lower their electrical resistance using electron beam irradiation and thermal annealing using Joule heat both separately and combined. Postprocessed PtC free-standing nanowires were characterized to evaluate their noise figure (NF) and thermal coefficients at the temperature range from 30 K to 80 °C. The thermal sensitivity of RTD was lowered with the reduced resistance but simultaneously the NF improved, especially with electron-beam irradiation. The temperature measurement resolution achievable with the PtC free-standing nanowires was 0.1 K in 1 kHz bandwidth.

Four-Point Measurement Setup for Correlative Microscopy of Nanowires.

The measurement method, which utilizes nanomanipulation of the nanowires onto a specially prepared substrate, was presented. It introduced a four-point resistance measurement setup on a chip suited for scanning probe microscopy measurements, integrating connectors and a nanowire specimen. A study on the resistance and resistivity of the thermally post-treated ZnO nanowires at 200 °C and 300 °C in air showed the dependence of these electrical parameters on the annealing temperature. The investigations of the electrical properties of blocks built on the basis of nanowires and their related devices could provide a useful guide not only for designing, fabricating and optimizing electromechanical nanodevices based on nanowires but also for their safe operation in future electronic applications.

Synergistic Effect of Precursor and Interface Engineering Enables High Efficiencies in FAPbI3 Perovskite Solar Cells.

Formamidinium lead iodide (FAPbI3)-based perovskite solar cells have gained immense popularity over the last few years within the perovskite research community due to their incredible opto-electronic properties and the record power conversion efficiencies (PCEs) achieved by the solar cells. However, FAPbI3 is vulnerable to phase transitions even at room temperature, which cause structural instability and eventual device failure during operation. We performed post-treatment of the FAPbI3 surface with octyl ammonium iodide (OAI) in order to stabilize the active phase and preserve the crystal structure of FAPbI3. The formation of a 2D perovskite at the interface depends on the stoichiometry of the precursor. By optimizing the precursor stoichiometry and the concentration of OAI, we observe a synergistic effect, which results in improved power conversion efficiencies, reaching the best values of 22% on a glass substrate. Using physical and detailed optical analysis, we verify the presence of the 2D layer on the top of the 3D surface of the perovskite film.

Novel type of whisker-tip cantilever based on GaN microrods for atomic force microscopy.

High-resolution scanning probe microscopy (SPM) is a fundamental and efficient technology for surface characterization of modern materials at the subnanometre scale. The bottleneck of SPM is the probe and scanning tip. Materials with stable electrical, thermal, and mechanical properties for high-aspect-ratio (AR) tips are continuously being developed to improve their accuracy. Among these, GaN is emerging as a significant contender that serves as a replacement for standard Si probes. In this paper, for the first time, we present an approach that demonstrates the application of GaN microrods (MRs) as high-AR SPM probes. GaN MRs were grown using molecular beam epitaxy, transferred and mounted on a cantilever using focused electron beam-induced deposition and milled in a whisker tip using a focused ion beam in a scanning electron/ion microscope. The presence of a native oxide layer covering the GaN MR surface was confirmed by X-ray photoelectron spectroscopy. Current-voltage map measurements are also presented to indicate the elimination of the native oxide layer from the tip surface. The utility of the designed probes was tested using conductive atomic force microscopy and a 24-hour durability test in contact mode atomic force microscopy. Subsequently, the graphene stacks were imaged.

Histological characteristics of macrodontic cheek teeth of guinea pigs.

Macrodontia is the enlargement of tooth dimensions of different ethologies. This work aims to show a histological evaluation of macrodontic teeth in guinea pigs. The material was obtained from animals postmortem. Ninety structural changes derived from 24 guinea pigs were evaluated. All teeth used in the study showed macrodontic changes. The samples were decalcified, dehydrated and embedded in paraffin. Material was cut in the transverse and longitudinal planes in relation to the alveolar bone. Histological evaluation included apical bud cells, pulp cavity cells, periodontium, dentin, enamel, cementum and alveolar bone tissue. Individual elements were evaluated with respect to their morphology and distribution. Moreover, the arrangement of the individual hard tooth structures was assessed on the teeth. No atypia was found among the cells that make up the apical bud, pulp or periodontal cavity. Displacement of periodontal cells or odontoblasts towards the pulp cavity as well as disorganization of the cell system in the pulp cavity were observed. Changes in the dentine ligaments and the reconstruction of the alveolar bone were also observed in areas where dentine and cement systems were affected. Dental slides were observed and showed that the enamel is also involved in structural remodelling of the pulp cavity. The histological assessment revealed that structural changes in macrodontic teeth involve the rearrangement of typical tooth tissues.

Occurrence of Lagovirus europaeus (Rabbit Hemorrhagic Disease Virus) in Domestic Rabbits in Southwestern Poland in 2019: Case Report.

Lagovirus europaeus (rabbit hemorrhagic disease virus [RHDV]) is a small, nonenveloped, single-stranded RNA virus that causes a severe, highly infectious, and fatal disease in rabbits (Oryctolagus cuniculus) called rabbit hemorrhagic disease (RHD). Since its discovery in the 1980s, it has posed a very serious threat to the global rabbit industry and the rabbit population in the wild. According to data from 2005 to 2018, the occurrence of RHD has been reported or suspected in 50 countries, with more than one-half of the reports being recorded in European countries. The main aim of the study was to detect Lagovirus europaeus (RHDV) strains found in domestic rabbits that died suddenly in the city of Wroclaw in southwest Poland. All animals (n = 14) tested in this study died naturally and showed macroscopic features at necropsy that indicated the possibility of death from RHD. As a result of the research, the presence of L. europaeus virus was confirmed in 8 samples of all 14 samples collected. All strains of Lagovirus europaeus isolated in the present study showed 100% nucleotide identity to L. europaeus GI.1 strain FRG and a strain isolated in New Zealand, as well as the L. europaeus GI.1a Erfurt strain. This suggests that it is likely that L. europaeus GI.2 strains have so far not displaced L. europaeus GI.1 strains from the environment in Poland. IMPORTANCE Lagovirus europaeus (RHDV) causes a severe, highly infectious, and fatal disease in rabbits called RHD. The disease is a very serious threat to the global rabbit industry and the rabbit population in the wild. The aim of the study was to detect Lagovirus europaeus (RHDV) strains in domestic rabbits that died suddenly in Poland. The presence of RHDV was confirmed in 8 samples of all 14 samples collected. This is one of the very few reports on the existence of this virus in pet rabbits in Poland.

Thermo-Optical and Structural Studies of Iodine-Doped Polymer: Fullerene Blend Films, Used in Photovoltaic Structures.

Optical and structural properties of a blend thin film of (1:1 wt.) of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) doped with iodine (I2) and then exposed to a stepwise heating were reported and compared with the properties of doped P3HT films. The UV-Vis(T) absorption measurements were performed in situ during annealing runs, at the precisely defined temperatures, in a range of 20-210 °C. It was demonstrated that this new method allows one to observe the changes of absorption spectra, connected with the iodine release and other structural processes upon annealing. In addition, the thermally-induced changes of the exciton bandwidth (W) and the absorption edge parameters, i.e., the energy gap (EG) and the Urbach energy (EU) were discussed in the context of different length of conjugation and the structural disorder in polymers and blends films. During annealing, several stages were distinguished and related to the following processes as: the iodine escape and an increase in P3HT crystallinity, the orderly stacking of polymer chains, the thermally inducted structural defects and the phase separation caused by an aggregation of PCBM in the polymer matrix. Moreover, the detailed X-ray diffraction studies, performed for P3HT and P3HT:PCBM films, before and after doping and then after their thermal treatment, allowed us to consider the structural changes of polymer and blend films. The effect of iodine content and the annealing process on the bulk heterojunction (BHJ) solar cells parameters was checked, by the impedance spectroscopy (IS) measurements and the J-V characteristics registration. All of the investigated P3HT:PCBM blend films showed the photovoltaic effect; the increase in power conversion efficiency (PCE) upon iodine doping was demonstrated.

Modulation of Prostanoids Profile and Counter-Regulation of SDF-1α/CXCR4 and VIP/VPAC2 Expression by Sitagliptin in Non-Diabetic Rat Model of Hepatic Ischemia-Reperfusion Injury.

Molecular mechanisms underlying the beneficial effect of sitagliptin repurposed for hepatic ischemia-reperfusion injury (IRI) are poorly understood. We aimed to evaluate the impact of IRI and sitagliptin on the hepatic profile of eicosanoids (LC-MS/MS) and expression/concentration (RTqPCR/ELISA) of GLP-1/GLP-1R, SDF-1α/CXCR4 and VIP/VPAC1, VPAC2, and PAC1 in 36 rats. Animals were divided into four groups and subjected to ischemia (60 min) and reperfusion (24 h) with or without pretreatment with sitagliptin (5 mg/kg) (IR and SIR) or sham-operated with or without sitagliptin pretreatment (controls and sitagliptin). PGI2, PGE2, and 13,14-dihydro-PGE1 were significantly upregulated in IR but not SIR, while sitagliptin upregulated PGD2 and 15-deoxy-12,14-PGJ2. IR and sitagliptin non-significantly upregulated GLP-1 while Glp1r expression was borderline detectable. VIP concentration and Vpac2 expression were downregulated in IR but not SIR, while Vpac1 was significantly downregulated solely in SIR. IRI upregulated both CXCR4 expression and concentration, and sitagliptin pretreatment abrogated receptor overexpression and downregulated Sdf1. In conclusion, hepatic IRI is accompanied by an elevation in proinflammatory prostanoids and overexpression of CXCR4, combined with downregulation of VIP/VPAC2. Beneficial effects of sitagliptin during hepatic IRI might be mediated by drug-induced normalization of proinflammatory prostanoids and upregulation of PGD2 and by concomitant downregulation of SDF-1α/CXCR4 and reinstating VIP/VCAP2 signaling.

HMG-CoA Reductase Inhibitor, Simvastatin Is Effective in Decreasing Degree of Myocarditis by Inhibiting Metalloproteinases Activation.

BACKGROUND: Acute myocarditis often progresses to heart failure because there is no effective, etiology-targeted therapy of this disease. Simvastatin has been shown to be cardioprotective by decreasing matrix metalloproteinases' (MMPs) activity. The study was designed to determine whether simvastatin inhibits MMPs activity, decreases the severity of inflammation and contractile dysfunction of the heart in experimental autoimmune myocarditis (EAM). METHODS: Simvastatin (3 or 30 mg/kg/day) was given to experimental rats with EAM by gastric gavage for 21 days. Then transthoracic echocardiography was performed, MMPs activity and troponin I level were determined and tissue samples were assessed under a light and transmission electron microscope. RESULTS: Hearts treated with simvastatin did not show left ventricular enlargement. As a result of EAM, there was an enhanced activation of MMP-9, which was significantly reduced in the high-dose simvastatin group compared to the low-dose group. It was accompanied by prevention of myofilaments degradation and reduction of severity of inflammation. CONCLUSIONS: The cardioprotective effects of simvastatin in the acute phase of EAM are, at least in part, due to its ability to decrease MMP-9 activity and subsequent decline in myofilaments degradation and suppression of inflammation. These effects were achieved in doses equivalent to therapeutic doses in humans.

Two Paralogous Gb3/CD77 Synthases in Birds Show Different Preferences for Their Glycoprotein and Glycosphingolipid Substrates.

Most glycosyltransferases show remarkable gross and fine substrate specificity, which is reflected in the old one enzyme-one linkage paradigm. While human Gb3/CD77 synthase is a glycosyltransferase that synthesizes the Galα1→4Gal moiety mainly on glycosphingolipids, its pigeon homolog prefers glycoproteins as acceptors. In this study, we characterized two Gb3/CD77 synthase paralogs found in pigeons (Columba livia). We evaluated their specificities in transfected human teratocarcinoma 2102Ep cells by flow cytofluorometry, Western blotting, high-performance thin-layer chromatography, mass spectrometry and metabolic labelling with 14C-galactose. We found that the previously described pigeon Gb3/CD77 synthase (called P) can use predominately glycoproteins as acceptors, while its paralog (called M), which we serendipitously discovered while conducting this study, efficiently synthesizes Galα1→4Gal caps on both glycoproteins and glycosphingolipids. These two paralogs may underlie the difference in expression profiles of Galα1→4Gal-terminated glycoconjugates between neoavians and mammals.

On limits of contact tracing in epidemic control.

Contact tracing and quarantine are well established non-pharmaceutical epidemic control tools. The paper aims to clarify the impact of these measures in evolution of epidemic. The proposed deterministic model defines a simple rule on the reproduction number [Formula: see text] in terms of ratio of diagnosed cases and, quarantine and transmission parameters. The model is applied to the early stage of Covid19 crisis in Poland. We investigate 3 scenarios corresponding to different ratios of diagnosed cases. Our results show that, depending on the scenario, contact tracing prevented from 50% to over 90% of cases. The effects of quarantine are limited by fraction of undiagnosed cases. The key conclusion is that under realistic assumptions the epidemic can not be controlled without any social distancing measures.

New Bird Sexing Strategy Developed in the Order Psittaciformes Involves Multiple Markers to Avoid Sex Misidentification: Debunked Myth of the Universal DNA Marker.

Sexing of birds is indispensable for scientific, breeding and conservation programs but is difficult in many species and is particularly problematic in the case of nestlings showing no sexual dimorphism. Most useful and efficient methods of sex determination are based on unique features of the Z and W sex chromosomes detected via PCR to distinguish males (ZZ) and females (ZW). During the last twenty-five years researchers searched for the universal marker capable of sexing a maximally wide spectrum of species in a single PCR assay. We screened the phylogenetically representative set of 135 Psittaciformes species including 59 species sexed for the first time. Two known (P2P8, CHD1iA) PCR markers and four additional W/Z polymorphisms (CHD1iE, CHD1i16, CHD1i9 and NIPBLi16) located within the Chromo Helicase DNA binding CHD1 or the Nipped-B homolog NIPBL genes were applied. We present the electrophoretic patterns obtained for the PCR products of the analyzed markers including most typical and atypical patterns allowing sex determination, as well as those obtained when the given marker failed in sexing. Technical aspects of molecular sex determination are discussed: the optimization of amplification conditions, direct PCR and potential misinterpretations. A truly universal marker has not been found, and therefore, we propose a sexing strategy based on multiple CHD1i16, NIPBLi16, CHD1i9 and CHD1iE markers. This new strategy confirms the sex of a given bird with at least two markers detecting independent Z/W polymorphisms, reduces the number of necessary PCR reactions and minimizes the risk of sex misidentification.

Determination of Stent Load Conditions in New Zealand White Rabbit Urethra.

BACKGROUND: Frequency of urethral stenosis makes it necessary to develop new innovative methods of treating this disease. This pathology most often occurs in men and manifests itself in painful urination, reduced urine flow, or total urinary retention. This is a condition that requires immediate medical intervention. METHODS: Experimental tests were carried out on a rabbit in order to determine the changes of pressure in the urethra system and to estimate the velocity of urine flow. For this purpose, a measuring system was proposed to measure the pressure of a fluid-filled urethra. A fluoroscope was used to observe the deformability of the bladder and urethra canal. RESULTS: Based on these tests, the range of changes in the urethra tube diameter, the pressures inside the system, and the flow velocity during micturition were determined. CONCLUSIONS: The presented studies allowed determining the behavior of the urethra under the conditions of urinary filling. The fluid-filled bladder and urethra increased their dimensions significantly. Such large changes require that the stents used for the treatment of urethral stenosis should not have a fixed diameter but should adapt to changing urethral dimensions.

The Application of Impedance Spectroscopy for Pseudomonas Biofilm Monitoring during Phage Infection.

Bacterial biofilm prevention and eradication are common treatment problems, hence there is a need for advanced and precise experimental methods for its monitoring. Bacterial resistance to antibiotics has resulted in an interest in using a natural bacterial enemy-bacteriophages. In this study, we present the application of quartz tuning forks (QTF) as impedance sensors to determine in real-time the direct changes in Pseudomonas aeruginosa PAO1 biofilm growth dynamics during Pseudomonas phage LUZ 19 treatment at different multiplicities of infection (MOI). The impedance of the electric equivalent circuit (EEC) allowed us to measure the series resistance (Rs) corresponding to the growth-medium resistance (planktonic culture changes) and the conductance (G) corresponding to the level of QTF sensor surface coverage by bacterial cells and the extracellular polymer structure (EPS) matrix. It was shown that phage impacts on sessile cells (G dynamics) was very similar in the 10-day biofilm development regardless of applied MOI (0.1, 1 or 10). The application of phages at an early stage (at the sixth h) and on three-day biofilm caused a significant slowdown in biofilm dynamics, whereas the two-day biofilm turned out to be insensitive to phage infection. We observed an inhibitory effect of phage infection on the planktonic culture (Rs dynamics) regardless of the MOI applied and the time point of infection. Moreover, the Rs parameter made it possible to detect PAO1 population regrowth at the latest time points of incubation. The number of phage-insensitive forms reached the level of untreated culture at around the sixth day of infection. We conclude that the proposed impedance spectroscopy technique can be used to measure the physiological changes in the biofilm matrix composition, as well as the condition of planktonic cultures in order to evaluate the activity of anti-biofilm compounds.

Quartz tuning fork mass change sensing for FIB/SEM technology.

In this paper we present a metrological method for determination of mass density of focused ion beam induced deposition (FIBID) materials using quartz tuning fork (QTF) mass change sensors. Dimension and density determination of FIBID deposited nanostructures is necessary to develop and reliable and repeatable microfabribrication technology of the highest versatility. The proposed metrological methodology allows to determine mass change with 5 pg resolution and accuracy below 5 % if density is considered. The described method is suitable for precise FIBID precursor parameters determination conducted during the deposition as actuation and signal read-out of the applied QTF can be performed electrically. High accuracy, resolution and stability are ensured due to excellent properties of quartz forming the sensor structure.

Application of Pontentilla anserine, Polygonum aviculare and Rumex crispus Mixture Extracts in a Rabbit Model with Experimentally Induced E. coli Infection.

The study evaluated the anti-colibacteriosis efficacy of herbs in experimental infection by rabbit pathogenic strain of E. coli O103 eae+. It also studied the effects of herbal mixture added to feed or water on blood parameters. This animal model was used since some E. coli strains pathogenic for rabbits are similar to the strains that are pathogenic to humans. The components of herbal extracts were Rumex crispus, Pontentilla anserine, and Polygonum aviculare. Supplementation was carried out in water (ExpW group) or feed (ExpF group), and four weeks later the animals were infected with the E. coli O103 eae+ strain. The administration of herbs increased the mean concentration of total protein and serum albumin (p < 0.01) without causing disturbances of electrolyte and acid-base balance. The highest total antioxidant capacity (TAS) value (p < 0.01) was observed in the ExpF group. The administration of a mixture of herbs and feed caused more reduction in the number of E. coli in cecum than supplementation into water after an experimental infection. The herbs applied in rabbits did not harm the secretory functions of liver, electrolyte, and acid-base balance of the blood. The application of the tested herbal mixtures can control the activity of the intestinal microbial community.

Calcitriol Analogues Decrease Lung Metastasis but Impair Bone Metabolism in Aged Ovariectomized Mice Bearing 4T1 Mammary Gland Tumours.

Calcitriol and its analogues are considered drugs supporting the anticancer treatment of breast cancer and preventing the osteoporosis that results from the development of cancer or from chemotherapy or hormone therapy. Following the orthotopic implantation of 4T1 mammary carcinoma cells into aged ovariectomized (OVX) mice, we evaluated the effects of calcitriol and its two analogues, PRI-2191 and PRI-2205, on metastatic spread and bone homeostasis. Calcitriol and its analogues temporarily inhibited the formation of metastases in the lungs. Unexpectedly, only mice treated with calcitriol analogues showed a deterioration of bone-related parameters, such as bone column density, marrow column density and the CaPO4 coefficient. These findings correlated with an increased number of active osteoclasts differentiated from bone marrow-derived macrophages in mice treated with the analogues. Interestingly, in the tumours from mice treated with PRI-2191 and PRI-2205, the expression of Tnfsf11 (RANKL) was increased. On the other hand, osteopontin (OPN) levels in plasma and tumour tissue, as well as TRAC5b levels in tumours, were diminished by calcitriol and its analogues. Despite a similar action of both analogues towards bone metabolism, their impact on vitamin D metabolism differed. In particular, PRI-2191 and calcitriol, not PRI-2205 treatment significantly diminished the levels of both 25(OH)D3 and 24,25(OH)2D3. In conclusion, though there is evident antimetastatic activity in old OVX mice, signs of increased bone metabolism and deterioration of bone mineralization during therapy with calcitriol analogues were observed.

Performance Evaluation of Miniature Integrated Electrochemical Cells Fabricated Using LTCC Technology.

Miniaturized and integrated analytical devices, including chemical sensors, are at the forefront of modern analytical chemistry. The construction of novel analytical tools takes advantage of contemporary micro- and nanotechnologies, as well as materials science and technology. Two electrochemical techniques were used in experiments: electrochemical impedance spectroscopy and cyclic voltammetry. The goal of this study was to investigate electron transfer resistance in a model solution containing Fe 2 + / 3 + ions and protein adsorption using integrated electrochemical cells with different geometry. Tests performed at various Fe 2 + / 3 + concentration allowed to verify that these cells work properly. The influence of bovine serum albumin adsorbing to the surface of the integrated electrochemical cells was investigated. In electrochemical impedance spectroscopy, the value of R c t increased with protein adsorption and the relative change of R c t was in range 21% to 55%. In cyclic voltammetry the decreasing amperometric response of the working electrode was used as evidence of protein adsorption on the electrode.